Optical Windows & Substrates
Square Synthetic Sapphire Substrates
Synthetic single-crystal sapphire substrates, optically polished on both faces and uncoated
Synthetic single-crystal sapphire substrates for optical and laboratory research setups. Select the side length and thickness to fit your assembly. Custom dimensions are available on request.
- Side-length range
- 5–50 mm
- Thickness range
- 0.5–3 mm
- Material
- Al₂O₃
- Surface finish
- Double-side optical polish
Product highlights
Optically polished sapphire for research assemblies
01Single-crystal sapphire
Synthetic crystalline alumina (Al₂O₃) with high hardness for good scratch resistance.
02Double-side optical polishing
Both faces are optically polished. The substrates are supplied without an optical coating.
03Optical measurements
For transmission and spectroscopy setups. Check the spectral requirements for your measurement.
04Square substrates
For square holders in optical benches and sample characterization setups.
Technical data
Technical specifications
Select the exact size using the Dimensions menu.
Square synthetic sapphire substrate specifications
| Parameter | Specification |
| Material | Synthetic single-crystal sapphire (Al₂O₃) |
| Geometry | Square plate |
| Nominal side length | 5 to 50 mm, depending on variant |
| Nominal thickness | 0.5, 1, 2 or 3 mm, depending on side length |
| Dimensional tolerance | ±0.05 mm (length, width and thickness) |
| Surface finish | Optically polished on both faces |
| Coating | None |
| Supply unit | 1 substrate in the selected dimensions |
The ranges describe the family; not every thickness is available at every side length.
Selection & technical notes
Check fit and optical requirements
Match the holder dimensions
Check the plate dimensions and thickness against the holder recess. For close-fitting assemblies, check the ±0.05 mm tolerance and confirm any edge requirements before ordering.
Specify critical optical tolerances
For critical applications, specify any required crystal orientation, flatness, parallelism, scratch-dig grade or spectral transmission. No pressure rating is specified for the substrate alone.
Need a different size?
Send the required side length, thickness and tolerances. Let us know if you have a drawing.
Request a custom size